Journal Papers

PUBLICATIONS

  1. Azman NM, Yusof Z, Rasid Z, Hassan M, Yahaya H, Yakub F, editors. Whirling frequencies of rotor systems using ANSYS APDL. IOP Conference Series: Materials Science and Engineering; 2021: IOP Publishing.
  2. Sabee SM, Yusof N, Rasid Z, Yahaya H, Yakub F, Hassan M, editors. Progressive failure analysis of laminated composite plates. IOP Conference Series: Materials Science and Engineering; 2021: IOP Publishing.
  3. Kasim FM, Roslan S, Rasid Z, Yakub F, Hassan M, Yahaya H, editors. Post-buckling of bamboo reinforced composite plates. IOP Conference Series: Materials Science and Engineering; 2021: IOP Publishing.
  4. Jamil T, Roslan S, Rasid Z, Hassan M, editors. Experimental and simulation of aerodynamic performance of the small-scale wind turbine blades for usage in Malaysia. IOP Conference Series: Materials Science and Engineering; 2021: IOP Publishing.
  5. Zuhri MY, Nasrudin MA, Nasrodin MAM, Sapuan SM, Hassan MZ. Mechanical properties under quasi-static loading of the core made of flax/poly(lactic acid) composite. Polimery. 2021;66(3):193-7.
  6. Norhasnan NHA, Hassan MZ, Nor AFM, Zaki S, Dolah R, Jamaludin KR, et al. Physicomechanical Properties of Rice Husk/Coco Peat Reinforced Acrylonitrile Butadiene Styrene Blend Composites. Polymers. 2021;13(7):1171.
  7. Rashidi H, Jamal H, Hassan MZ, Sendek SSM, Sopie S, Hamid R. Coastal Structures as Beach Erosion Control and Sea Level Rise Adaptation in Malaysia: A Review. Water. 2021;13(13):1741.
  8. Suhot MA, Hassan MZ, Aziz SaA, Daud MYM. Recent Progress of Rice Husk Reinforced Polymer Composites: A Review. Polymers. 2021;13(15):2391.
  9. Nor AFM, Hassan MZ, Rasid ZA, Sarip S, Daud MYM. Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design. Applied Composite Materials. 2021:1-26.
  10. Haris NIN, Ilyas RA, Hassan MZ, Sapuan SM, Atiqah A, Jamaludin KR, et al. Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites. Polymers. 2021;13(3343).
  11. M Hassan SMS, Z A. Rasid, A F Mohd Nor, R Dolah, Daud MY. Impact Damage Resistance and Post-Impact Tolerance of Optimum Banana-Pseudo-Stem-Fiber-Reinforced Epoxy Sandwich Structures. Applied Sciences. 2020;10(2):684.
  12. Yusof Z, Rasid ZA, Hassan MZ, Sapuan S, Sarip S, Yahaya H, et al. The parametric instability improvement of fully anisotropic composite plates with embedded shape memory alloy. Advanced Composites Letters. 2020;29:2633366X19899405.
  13. Mohd Faizal Sadali MZH, Fauzan Ahmad, Hafizal Yahaya, Rasid ZA. Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness, and micropores for manufactured Ti6Al4V parts. Journal of Materials Research. 2020;35(15):2025-35.
  14. Hassan MZ, Roslan SA, Sapuan S, Rasid ZA, Mohd Nor AF, Md Daud MY, et al. Mercerization optimization of bamboo (bambusa vulgaris) fiber-reinforced epoxy composite structures using a box–behnken design. Polymers. 2020;12(6):1367.
  15. Zaki SA, Syahidah SW, Shahidan MF, Ahmad MI, Yakub F, Hassan MZ, et al. Assessment of outdoor air temperature with different shaded area within an urban university campus in hot-humid climate. Sustainability. 2020;12(14):5741.
  16. Dolah R, Hassan MZ, Krishnan S, Ramlie F, Din MFM, Jamaludin KR. Development of FNCO Taguchi Method for Robust Measurement System Using a Case Study of T-Peel Test on Adhesion Strength. Applied Sciences. 2020;10(18):6203.
  17. Zaki SA, Azid NS, Shahidan MF, Hassan MZ, Md Daud MY, Abu Bakar NA, et al. Analysis of Urban Morphological Effect on the Microclimate of the Urban Residential Area of Kampung Baru in Kuala Lumpur Using a Geospatial Approach. Sustainability. 2020;12(18):7301.
  18. CHING KV, DOLAH R, HARON FR, HASSAN MZ. COMPREHENSIVE MULTISITE EFFICIENCY EQUATION FOR SEMICONDUCTOR TEST EQUIPMENT. Journal of Engineering Science and Technology. 2020;15(6):3971-82.
  19. Ibrahim M, Hassan M, Ibrahim I, Ibrahim M, Daud M, Bani N, editors. Life-cycle Assessment on the Highway Street Lantern using Weibull Probability Approach. Journal of Physics: Conference Series; 2019: IOP Publishing.
  20. Alagapan P, Hassan M, Ibrahim M, Daud M, Bani N, Kutty R, editors. Measurement of hazardous personal noise exposure in spice manufacturing industry. Journal of Physics: Conference Series; 2019: IOP Publishing.
  21. Subramaniam M, Hassan M, Sadali M, Ibrahim I, Daud M, Aziz SA, et al., editors. Evaluation and analysis of noise pollution in the manufacturing industry. Journal of Physics: Conference Series; 2019: IOP Publishing.
  22. Roslan S, Yusof Z, Rasid Z, Yahaya M, Hassan M, Mahmud J. Dynamic instability response of smart composite material. Materialwissenschaft und Werkstofftechnik. 2019;50(3):302-10.
  23. Amran ME, Muhtazaruddin MN, Bani NA, Kaidi HM, Hassan MZ, Sarip S, et al. Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital. Bulletin of electrical engineering and informatics. 2019;8(4).
  24. Hassan MZ, Sapuan S, Roslan SA, Sarip S. Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology. Journal of Materials Research and Technology. 2019;8(4):3517-28.
  25. M Sadali MH, N Ahmad, H Yahaya, Nor AM. Effect of Hatching Distance on Surface Morphology and Surface Roughness of the Ti6Al4V for Biomedical Implant using SLM Process. Malaysian Journal of Microscopy. 2019;15(1):72-82.
  26. O. Nurihan MRMH, Z.A. Rasid, M. Z. Hassan, A.F.M. Nor. The Elastic Properties of Unidirectional Bamboo Fibre Reinforced Epoxy Composites. International Journal of Recent Technology and Engineering. 2019;8(3):7187-93.
  27. Bani N, Mad Kaidi H, Muhtazaruddin M, Mohamed Rashidi A, Hassan M, Sarip S, et al. Harvesting sustainable energy from saltwater, part II: effect of electrode geometry. Test engineering and management. 2019;81(11-12).
  28. Hussain NH, Mohammad R, Ahmad N, Hassan MZ, Kutty RM, Sarip S, editors. Grooming Future Scientists and Engineers from the Root through Fun Learning Concept. Journal of Physics: Conference Series; 2019: IOP Publishing.
  29. Roslan S, Rasid Z, Toh H, Hassan M. Aerodynamic Performances of Small Scale Horizontal Axis Wind Turbine Blades for Applications in Malaysia. International Journal of Recent Technology and Engineering. 2019;8(4):2277-3878.
  30. Roslan S, Rasid Z, Hassan M, editors. Bamboo reinforced polymer composite-A comprehensive review. IOP Conference Series: Materials Science and Engineering; 2018: IOP Publishing.
  31. Muhalim N, Hassan M, Daud Y, editors. Elastic-Plastic Behaviour of Ultrasonic Assisted Compression of Polyvinyl Chloride (PVC) Foam. IOP Conference Series: Materials Science and Engineering; 2018: IOP Publishing.
  32. Wahab AA, Nuh A, Rasid Z, Abu A, Tanasta Z, Hassan M, et al. Tensile behaviours of single‐walled carbon nanotubes: Dehnungsverhalten einwandiger Kohlenstoffnanoröhren. Materialwissenschaft und Werkstofftechnik. 2018;49(4):467-71.
  33. Ibrahim I, Sarip S, Bani N, Ibrahim M, Hassan M, editors. The Weibull probabilities analysis on the single kenaf fiber. AIP Conference Proceedings; 2018: AIP Publishing LLC.
  34. Ibrahim MHIb, Hassan MZb, Ibrahim I, Rashidi AHM, Nor SFM, Daud MYM, editors. Seawater infiltration effect on thermal degradation of fiber reinforced epoxy composites. AIP Conference Proceedings; 2018: AIP Publishing LLC.
  35. S Amni Roslan MZH, Z A. Rasid, H I Ibrahim. Tensile Behaviour of Chemical Treatment for Bamboo Epoxy Composites. CHEMICAL ENGINEERING TRANSACTIONS. 2018;63:745-50.
  36. Siti Nadia Mohd Bakhori MZH, Sa’ardin Abdul Aziz, Siti Hajar Sheikh Md. Fadzulah, Fauzan Ahmad. Tensile Properties of Jute-Polypropylene Composites. CHEMICAL ENGINEERING TRANSACTIONS. 2018;63:727-32.
  37. Karim ME, Munir AB, Karim MA, Muhammad-Sukki F, Abu-Bakar SH, Sellami N, et al. Energy revolution for our common future: An evaluation of the emerging international renewable energy law. Energies. 2018;11(7):1769.
  38. S. Sarip CGA, N. Shafie, N. A. N. Mahadzir, F. Yakob, M. Z. Hassan. Hybrid Renewable Energy Power System Model Based on Electrification Requirements of One Fathom Bank Malaysia. Indonesia Journal of Electrical Engineering and Computer Science. 2018;12(2).
  39. Bani NA, Hassan MZ, Kaidi HM, Muhtazaruddin MN, Sarip S, Saleh S, et al. Feasibility Study of a Low Cost Saltwater Lamp for Rural Area. International Journal of Integrated Engineering. 2018;10(7).
  40. Ibrahim MI, Hassan MZ, Dolah R, Yusoff MZM, Salit MS. Tensile behaviour for mercerization of single kenaf fiber. Malaysian Journal of Fundamental and Applied Sciences. 2018;14(4):437-9.
  41. Bani NA, Hassan MZ, Kaidi HM, Hashim NFM, Dziyauddin RA, Musa R, et al. Assessment of Health Status of the Elderly and Pre-elderly at a Malaysia Elderly Care Centre. International Journal of Integrated Engineering. 2018;10(7).
  42. Yacob DH, Sarip S, Suhot M, Hassan M, Aziz S, Daud M, et al. Critical Design Factors on Performance of Car Jack Lifting Operations. Indonesian Journal of Electrical Engineering and Computer Science. 2018;12(2):521-6.
  43. Abu Bakar MS, Hassan, M. Z., Bakhori, S., Daud, M. Y. M., Sarip, S., Ismail Z. Improvement of universal parts for pick and place machine in semiconductor industry using QFD approach. ARPN Journal of Engineering and Applied Sciences. 2016;11(12):7735-40.
  44. Daud Y, Hassan, M. Z., Sarip, S., Aziz, S. A., Muhalim, N. A. D., Raman, N. A., Jamaludin KR. Mechanical properties of quasi-static and ultrasonic compaction of stainless steel powder metallurgy. ARPN Journal of Engineering and Applied Sciences. 2016;11(12):6594-8.
  45. Bakar MA, Hassan M, Bakhori S, Daud M, Sarip S, Ismail Z. Improvement Of Universal Parts For Pick And Place Machine In Semiconductor Industry Using QFD Approach. ARPN Journal of Engineering and Applied Sciences. 2016;11(12):7735-40.
  46. Lazim J, Sarip S, Rahman A, Hassan M, Aziz S, editors. Energy Management Strategies at Emergency Department Block C Hospital Sungai Buloh, Malaysia. Applied Mechanics and Materials; 2015: Trans Tech Publications Ltd.
  47. Roslan S, Hassan M, Rasid Z, Zaki S, Daud Y, Aziz S, et al. Mechanical properties of bamboo reinforced epoxy sandwich structure composites. International Journal of Automotive and Mechanical Engineering. 2015.
  48. Bakhori S, Hassan M, Daud Y, Sarip S, Rahman N, Ismail Z, et al., editors. Mechanical behavior of Kenaf/Epoxy corrugated sandwich structures. IOP Conference Series: Materials Science and Engineering; 2015: IOP Publishing.
  49. Roslan SAH, Rasid, Z. A., Hassan MZ. The natural fiber composites based on bamboo fibers: A review. ARPN Journal of Engineering and Applied Sciences. 2015;10(15):6279-88.
  50. Hassan MZ, Umer R, Balawi S, Cantwell WJ. The impact response of environmental-friendly sandwich structures. Journal of Composite Materials 2014;48(25):3083-90.
  51. Yang FJ, Hassan MZ, Cantwell WJ, Jones N. Scaling effects in the low velocity impact response of sandwich structures. Composite Structures. 2013;99:97-104.
  52. Hassan M, Cantwell WJ. Strain rate effects in the indentation behavior of foam-based sandwich structures. Journal of Composite Materials. 2012;46(10):1191-9.
  53. Zhou J, Hassan MZ, Guan Z, Cantwell WJ. The low velocity impact response of foam-based sandwich panels. Composites Science and Technology. 2012;72(14):1781-90.
  54. Hassan MZ, Guan ZW, Cantwell WJ, Langdon GS, Nurick GN. The influence of core density on the blast resistance of foam-based sandwich structures. International Journal of Impact Engineering. 2012;50:9-16.
  55. Hassan MZ, Cantwell WJ. The influence of core properties on the perforation resistance of sandwich structures – An experimental study. Composites Part B: Engineering. 2012;43(8):3231-8.
  56. MZ Hassan WC. Strain rate effects in the mechanical properties of polymer foams. International Journal of Polymers and Technologies. 2011;3(1):2.